Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Collingdale?
Garage door work in Collingdale typically runs $150 – $600 for most repairs, with a single spring replaced at $180 – $340 and a full new door installed at $700 – $2200. Small fixes like roller or track work start much lower, and opener jobs land between $120 and $550 depending on whether we repair what you have or install a new unit. Every number on this page is a typical estimate for the Collingdale market in 2026; the written estimate you get before any work starts sets the final price.
A garage door is the largest moving part on most Collingdale homes. The older housing stock along Clifton Avenue and MacDade Boulevard means we see a lot of twenty- and thirty-year-old doors still running original openers, and that mix of old and new hardware shapes what a job actually costs. Call (833) 468-3037 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Key takeaways
- Most Collingdale garage door repairs fall in the $150 – $600 range.
- Springs are priced per spring: $180 – $340 for one, about double for the matched pair most doors need.
- A new door installed is $700 – $2200, and the door size and material drive most of that spread.
- We work on the brand already in your garage: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor.
- Estimates are free, and the written estimate is the price.
Garage Door Cost Breakdown (2026)
Here’s how the numbers break out for Collingdale. These are typical estimated ranges, not quotes. The exact figure depends on your door, the part, and what we find once we’re looking at it.
| Job | Typical estimated range |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Spring repair (matched pair) | about twice the single-spring range |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
What pushes a job toward the top of its range? Usually it’s a door that’s been running on a failing spring for a while, so the cables and rollers have taken extra strain and need to be replaced at the same time. A single clean repair sits near the bottom. A door with two or three worn parts sits higher, and bundling them into one visit is almost always cheaper than three separate calls. On the installation side, the spread from $700 to $2200 comes down to door size, material (steel up to insulated carriage-style), and whether the existing opener can handle the new door’s weight.
We handle the whole lifecycle under one call: repair, spring replacement, opener work, and full installation. No referrals out. For a closer look at how we approach the work, see our garage door repair Fishtown page.
What Affects Garage Door Pricing in Collingdale
Two doors that look the same from the street can price very differently. Here’s what actually moves the number:
- Door age and hardware generation. A lot of Collingdale garages still have doors from the 1980s and 1990s on their original opener. Older hardware sometimes means a part is no longer standard, so we source the right fit rather than forcing a universal piece. That’s where brand familiarity pays off; we work on eight of the most widely installed brands in residential use, so we know what’s inside your door before we open it.
- Torsion vs. extension springs. Torsion springs sit above the door under heavy tension; extension springs run along the sides. They’re different parts with different installs, and the price reflects which one you have. Either way, both live in the $180 – $340 per-spring range for typical work.
- Whether one part failed or several are worn. A snapped spring often takes a cable or a roller with it. Replacing the worn pieces together is cheaper than a second visit later.
- Opener type. A legacy chain-drive opener and a newer smart-home-compatible unit need different parts. We repair both, so you’re not stuck calling a factory service line for a connected opener that’s stopped responding.
- Door size and material for new installs. A single-car steel door sits near $700; a wider insulated door with windows pushes toward the top of the $700 – $2200 range.
- Access and clearance. Tight garages, low headroom, and older framing can add labor time, which is one reason a written estimate matters before work begins.
How to Save on Garage Door Repair in Collingdale
You don’t need to spend the top of the range to get a door that works and stays safe. A few things help:
- Fix it early. A door that’s getting stiff or noisy is usually asking for a roller or track adjustment ($110 – $240). Wait until something breaks and you’re often paying for the broken part plus what it damaged on the way down.
- Bundle small jobs. If your rollers are shot and the track is out of line, doing both in one visit is cheaper than two separate calls.
- Repair the opener before replacing it. Opener repair ($120 – $320) is usually the smarter call unless the unit is truly at the end of its life. We diagnose before we recommend anything.
- Replace a panel, not the door. A dented or damaged section often costs $250 – $500 to swap rather than a full door.
- Get a free written estimate first. That’s the number that counts, and it costs nothing to get one. Call (833) 468-3037.
Is it cheaper to repair or replace a garage door in Collingdale?
Repair is cheaper in most cases: a $150 – $600 repair beats a $700 – $2200 installation. Replacement makes more sense when the door itself is warped or rusted through, when multiple panels are damaged, or when repairs would add up past roughly half the cost of a new door. For a single failed part, repair wins nearly every time.
If you’re weighing it, we’ll tell you honestly which way the numbers point. Call (833) 468-3037 for a free estimate.
How much does spring repair cost in Collingdale?
$180 – $340 for one spring. Most doors use a matched pair, and because both springs wear together, they’re usually replaced at the same time, so a pair runs about twice that range. Springs are under extreme tension and are not a DIY repair. A trained technician has the tools and the know-how to release that tension safely. Call (833) 468-3037 for an exact quote.
How much does a new garage door cost in Collingdale?
$700 – $2200 installed, depending on size and material. A single-car steel door sits near the bottom; a larger insulated door with windows sits near the top. A new opener, if you need one, adds $250 – $550. Call (833) 468-3037 and we’ll put together a written estimate for your opening.
How much does garage door opener repair cost in Collingdale?
$120 – $320, depending on the fault. Dead remotes, a motor that runs but won’t lift the door, and reversed safety sensors are common and usually repairable. We work on LiftMaster, Chamberlain, Genie, and Craftsman openers, including smart-home-compatible units, so we know the system already in your garage. Call (833) 468-3037 for a free estimate.
Can you come today if my door is stuck?
Often yes. When your door won’t move, we move fast. Same-day service is available, and for urgent situations we offer dedicated emergency garage door response. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. If a call comes in outside dispatch hours, it’s booked into the next opening. The price is set per job by the written estimate, the same as any other visit. Call (833) 468-3037.
Why does garage door repair cost what it does?
Because the parts are safety-critical and the work is skilled. A garage door can weigh hundreds of pounds, and every part works together to keep it balanced and controlled. The spring carries the weight, the cables hold the tension, and the opener just guides it. When one part fails, the rest take the load, which is why we check the whole system rather than swapping one piece and leaving. Our technicians have up to 11 years of experience, and spring work is a named specialty here, not something we subcontract.
What happens when you call?
We ask what the door is doing, what brand it is, and how old it is, so we can come prepared. When we arrive, we look at the springs, cables, rollers, track, and opener, then give you a written estimate before any work starts. You decide, and we do the job. One call covers installation, repair, openers, and emergencies. Call (833) 468-3037. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Get a Free Estimate in Collingdale
Whether your door needs a $180 spring or a full $700 – $2200 replacement, you’ll get a straight answer and a written price before we touch anything. Estimates are free, the price is set per job, and we work on the brand already in your garage. Call (833) 468-3037 to schedule. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Garage Door Repair Fishtown.
Pricing reflects the Collingdale market as of 2026. Garage Door Repair Fishtown offers free estimates – call (833) 468-3037.
What Our Customers Say
"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Colleen Ackerman"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Diego Mendoza"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Danielle Brooks